Large 2200lb Quick release Remote Actuation Kit
This Kit contains a Large Quick Release with an air cylinder installed, a Remote Pressure Reservoir with a 24VDC 3 Way Solenoid Valve attached, and a battery box that uses common 9 volt batteries. Also included is 1/4 tubing to connect the Reservoir and the Quick Release, extra 1/4 fillings, and an air chuck for filling the reservoir.

Here"s how it works. 1) Place the Quick Release and Reservoir where they need to work. 2) connect the Reservoir and the Quick Release with the supplied tubing; connectors are push in type. 3) Hook up the wiring as shown and test by pushing the button: the solenoid will click if you have hooked up correctly. 4) Fill the reservoir through the Schrader fill valve to 100- 125 PSI (6,9 - 8,6 BAR). 5) Remove the safety PIP pin and you are hot and ready to go.