Quick Release LatchesMini Quick Release Latch WLL 200lbsMedium Quick Release WLL 500lbsLarge Quick Release Latch WLL 2200l..Stainless Steel Large Quick Release ..Large Quick Release with Battery Box..Extra Large Quick Release WLL 10,000..Extra Large Quick Release with Batte..25,000 WLL Quick Release LatchAir actuator, 24VDC, Large Quick Rel..Air actuator, 120VAC, Large Quick Re..Air actuator, 24VDC, Extra Large Qui..Air actuator, 120VAC, Extra Large Qu..CO2 Remote pressure supplyCleaning Kit for Squib PocketSafety PIP pin for Large Quick Relea..Safety PIP pin for Extra Large Quick..Pyro Push pin for Large Quick Releas..Pyro Push pin for Extra Large Quick ..
|
Part # |
QR-LARGE-BATTERY-REMOTE |
 Large 2200lb Quick release Remote Actuation Kit This Kit contains a Large Quick Release with an air cylinder installed, a Remote Pressure Reservoir with a 24VDC 3 Way Solenoid Valve attached, and a battery box that uses common 9 volt batteries. Also included is 1/4 tubing to connect the Reservoir and the Quick Release, extra 1/4 fillings, and an air chuck for filling the reservoir.  Here"s how it works. 1) Place the Quick Release and Reservoir where they need to work. 2) connect the Reservoir and the Quick Release with the supplied tubing; connectors are push in type. 3) Hook up the wiring as shown and test by pushing the button: the solenoid will click if you have hooked up correctly. 4) Fill the reservoir through the Schrader fill valve to 100- 125 PSI (6,9 - 8,6 BAR). 5) Remove the safety PIP pin and you are hot and ready to go. *
|